產品詳細介紹 |
|
1. Measurement parameters : Z, L, C, DCR, ESR, D, Q, and q 2. Test conditions : 100Hz, 120Hz, 1KHz, 10KHz, 100KHz(MT4080a only), 1Vrms, 0.25Vrms, 0.05Vrms 3. 0.2% basic accuracy 4. Dual LCD display 5. Very quickly response 6. Fully auto/manual selection 7. DC resistance measurement 8. Rechargeable battery/ AC powered 9. User friendly 10. Infrared Interface ( RS 232C)
D Accuracy D accuracy De is given as
Accuracy applies when Dx (measured D value) < 0.1 When DX > 0.1, multiply De by (1+Dx)
Q Accerarcy Q accuracy is given as
Where, Qx is the measure Q value, De is the relative D accuracy Accuracy applies when Qx · De < 1
q Accerarcy q accuracy q is given as
Measuring Speed Fast : 4.5 meas. /sec Slow : 2.5 meas. /sec
General: Temperature : 0°C to 40°C (Operating), 20°C to 70°C (Storage) Relative Humidity : Up to 85% Battery Type : NiMh or Alkaline (2AA size) Battery Charge : Constant current 150 mA approximately Battery Operation Life : 2.5 Hours typical AC Operation : 110V/220V AC, 60/50Hz with proper Adapter Low Power Warning : under 2.2V Dimensions : 6.9" x 3.4" x 1.9" (LxWxH) (174mm x 86mm x 48mm) Weight : 470g
Order Information MT4080A 100Hz to 100KHz Handheld LCR Merter Standard Accessories Shorting bar DC 6V power adapter AA-Size Ni-Mh rechargeable battery
Optional Test Fixtures/Accessories TL08A SMD test probe TL08B 4-wire test chips TL08C 4-wire Kelvin chips Carry case RS232 To Infrared Adapter |
產品功能描述 |
|
頻率 |
100Hz, 120Hz, 1KHz, 10KHz, 100KHz(MT4080A only) |
精度 |
0.4%(MT4080A) |
測試電平 |
1Vrms, 0.25Vrms, 0.05Vrms, 1Vdc(for DCR) |
輸出阻抗 |
100Ω ±5% |
顯示范圍 |
|
Z |
0.001Ω To 9999MΩ |
L |
0.001µH To 9999H |
C |
0.001PF To 9999F |
DCR |
0.000Ω To 9999MΩ |
ESR |
0.000Ω To 9999Ω |
D |
0.000 To 9999 |
Q |
0.000 To 9999 |
q |
-180.0 To 180.0 |
連接方式 |
lrDA |
傳送信號 |
Tx及Rx |
流程控制 |
XON/XOFF |
溫度 |
0℃-40℃(操作時) -20℃-70℃(儲存時) |
相對濕度 |
0-85% |
測量速度 |
快速 4.5次/秒 慢速 2.5次/秒 |
電池 |
|
電池壽命 |
2.5小時 |
產品特征 |
|
長度 |
48mm |
寬度 |
174mm |
高度 |
86mm |
重量 |
470g |
產品持有證書 |
|
|
CE | |